Merancang Listrik Tenaga angin

Bagi yang ingin membuat Listrik tenaga angin dapat melihat step by step experimen pembuatan listrik tenaga angin Silahkan klik link dibawah:

This page serves as an index of pages that detail how we build a 10' diameter wind turbine. The machine is of a simple design, largely based on Hugh Piggott's designs. It features and axial flux 3 phase alternator. It should be fairly efficient in low winds (producing perhaps in the ballpark of 100 watts in low 10mph winds) and it should produce around 700 watts in winds of 25mph, at which time the machine should begin to furl. Peak power we see from this machine is about twice that (1500 watts) although I don't believe the alternator can withstand that for long. It makes for a nice, quiet low wind machine. Below are links to different stages of the project.

Metal Work Part 1: On this page we build the main chassis for the machine.

Metal Work Part 2: On this page we fabricate the tail boom.

Coil Winder: This page details construction of the coil winder.

Stator mold: Details of the mold in which we cast the stator.

Stator: Detail of winding the coils and casting the stator.

Magnet Rotors: Building the magnet rotors.

Alternator Assembly: Assembling the alternator

Wind turbine blades: How to carve the blades

Blade assembly: How to assemble the blades

Rectifier: How to build the 3 phase rectifier

Towers: An older page with thoughts about towers and some ideas